Rositek Manual Pollen Press for Brick MPP2 ( Manual Pollen Press ) - Including Handheld Thread Press and Pollen Press Mold
Rositek large manual pollen press machine for making brick hash - including handheld thread press with double extra long lever handles and a set of pollen press mold, capable of being heated, it machine reaches max 2 pressure of force.
About the Brick Press - The manual thread press includes an aluminum-made frame, a rough thread rod, a solid steel nut, 2 pieces of lever handles ( and a 3-piece design aluminum press mold.
Easy to Operate - Step1 - after loading flower, tea, pollen, or other fine material inside of the press mold. Step2 - move the mold in-between the base of the press and the rod of the thread press. Step3 - Insert the handle into the double-side holes of the frame and insert another handle into the hole of the threaded rod. Step4 - twist two handles tightly, please insert another hole on the rods for the further process.
About 3-Piece Pollen Brick Maker - It is made of 6061 aluminum, 3 pieces in total, the thickness of the finished brick is not limited. [Internal dimension of maker: 2.47"(width) x 4.36" (Length) x 1.75" (Depth)]. We don't recommend putting the parchment paper between the material and ram/tray to prevent it from getting stuck while taking it off.
Capable of Being Heated - The mold made of 6061 aluminum always transfers and retains heat to melt the materials, so you can pre-heat the mold or materials before loading complete or heat up the mold with hot water/another method after loading the materials.
Caution During the Extraction - (1) The aluminum mold only works with the thread press, so please do not pair the mold with other equipment to protect it from damage (2) The thread press can be paired with a 2x4" pre-press or a cylinder prepress mold. (3) The dimension of the base of the thread press: 5" ( Length ) x 3.1" ( Width ) x 4.3" ( Max Height ).
- Maximum Pressure: 2 Ton
- Inner Dimension of Pollen Mold: 3 x 5"
- Max height between base and ram: 105mm/4.13"
- Dimension of the Mold: 2.47" x 4.36" x 1.75"
- Gross Weight: 11 lbs / 5 kg
- Packaging Dimension: 17.1" x 10.6" x 7.6"
- Discreet Packaging
- Warranty: 1-Year
- The aluminum mold only works with the thread press, so please do not pair the mold with other equipment to protect it from damage
- The thread press can be paired with a 2x4" pre-press or a cylinder prepress mold.